C2 Hybrid Series
The Hybrid C2 series of waterproof hybrid connectors from GT Contact incorporate both power and signal connections within a single housing. Offered with a bayonet-style coupling and sealed to IP67 the Hybrid C2 series has a cable to panel-mount design, with the panel connector housing the male connection. Designed for panel cut-outs of 16mm with a 2pin power, 10 pin signal layout the Hybrid C2 series has a solder style panel termination and pre-wired cable end connectors. The panel connectors are also rear potted giving IP67 protection to products even if the connector is unmated or sealing cap not connected. The Hybrid C2 series is perfect for applications such as Outdoor AP, LED Screens, Outdoor Security Systems, Energy Monitoring Systems, Medical Devices, and Marine Equipment.
Product Variations
| Product Code | Panel Cut out Size Inches | Compliance | Number of Pins | IP Rating | Current Rating A | Gender | Termination Style | Mating Style | Housing Material | Housing Style |
|---|---|---|---|---|---|---|---|---|---|---|
| GT1D2212-0A2A0(S) | 5/8" | RoHS | 2, 10 | IP67 | 10, 1 | Female | Solder | Bayonet | Plastic | Rear-nut Panel Mount |
| GT1D2213-0A2A0(S) | 5/8" | RoHS | 2, 10 | IP67 | 10, 1 | Male | Solder | Bayonet | Plastic | Rear-nut Panel Mount |
| GT1D22B2-0A2A0(S) | 5/8" | RoHS | 2, 10 | IP67 | 10, 1 | Female | Solder | Bayonet | Plastic | Rear-nut Panel Mount |
| GT1D22B3-0A2A0(S) | 5/8" | RoHS | 2, 10 | IP67 | 10, 1 | Male | Solder | Bayonet | Plastic | Rear-nut Panel Mount |
| GT1D2222-2A2A1-XX | 5/8" | RoHS | 2, 10 | IP67 | 10, 1 | Female | Pre-wired | Bayonet | Plastic | Cable Mount |
| GT1D2223-2A2A1-XX | 5/8" | RoHS | 2, 10 | IP67 | 10, 1 | Male | Pre-wired | Bayonet | Plastic | Cable Mount |
| GT1D22A2-2A2A1-XX | 5/8" | RoHS | 2, 10 | IP67 | 10, 1 | Female | Pre-wired | Bayonet | Plastic | Cable Mount |
| GT1D22A3-2A2A1-XX | 5/8" | RoHS | 2, 10 | IP67 | 10, 1 | Male | Pre-wired | Bayonet | Plastic | Cable Mount |